A good Brass finished aneroid barometer with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and fully expopsed decorative movement with twin capsules and temperature compensated movement. The dial is about 150mm diameter and is divided into millibar divisons (each .5 inch marked only for indication and UK market) You will require a case with a hole 80mm diameter and the wood at least 30mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.
Click for Larger Image

A good Brass finished aneroid barometer with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and fully expopsed decorative movement with twin capsules. The dial is about 125mm diameter and is divided into millibar divisons ans Inches of Mercury (old fashioned measurement in UK) You will require a case with a hole 80mm diameter and the wood at least 30mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.
Click for larger image

A good Brass finished aneroid barometer with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The dial is about 150mm diameter and is divided into millibar divisons (each .5 inch marked only for indication and UK market) You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.
Can also be supplied with one of our 17 different 'Topical' Dials
Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Golfers barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Golfering barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Motorists barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Fishermans barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique DIY barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Equestrian barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Executives barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Farmers barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Footballers barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Gardeners barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Gentlemans barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Ladys barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Pets barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Shooters barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Sports barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Wild Fowl barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image

This dial fitted to a good Brass finished aneroid barometer (as seen above ref 160SD) with 4 fixing screws for front fitting to your own case. This model has bevelled edged mineral glass front and temperature compensated single capsule movement. The unique Yachtsmans barometer dial is about 150mm diameter and is divided into inches of pressure. You will require a case with a hole 80mm diameter and the wood at least 24mm deep - more better. Do not forget to leave a hole for adjusting the movement for altitude with.

Click for larger image